1000W Manual Panel Heater

This 1000W panel heater is easy to operate with 2 heat settings and manual controls, it will get your room warmed up in no time. Assemble its included wheels to easily move between rooms, or mount on your wall to save on floor space. Safety is a priority for us at Goldair, so this heaters safety tip-over switch will only allow it to work in an upright position, and with overheat protection, if it gets to hot it will turn itself off.

Great for Small Rooms

• Where To Buy
  • 
• Features

  • 2 Heat Settings
    Adjustable Electronic Thermostat
    Wall Mount or Castors
    Manual Control
    Safety Tip Over Switch
    Overheat Protection
    2 Year Warranty

• About The Technology
  • Panel heaters are convection heaters and provide warmth based on the principle of hot air attracting cool air over a large panel surface. Air is drawn over the element and rises up through the unit and out the top through vents. Panel heaters are typically wall mounted and provide efficient heating in lounges, hallways and bedrooms.
• Specifications
  •  

    Dimensions: H: 455mm, W: 590mm, D: 275mm.
    Weight: 3.8kg
    Wattage: 1000W
    Warranty: 2 Years

     

• User Manual
  • Check out the User Manual for safety, operational and installation instructions.
• Frequently Asked Questions
  •  How does a mechanical thermostat work?
    This heater has a mechanical thermostat that cannot be set to a specific temperature.

    The best way to set one is to turn it up to full (rotate it clockwise all the way until it stops) then when the room reaches a temperature you are comfortable with, then slowly turn it back until it just clicks off. You should hear it 'click'.

    Then just leave it at that position and the heater will cycle on and off to maintain the comfort level you have selected.

    Can I mount this heater on a wall?
    Yes, this panel heater comes with a bracket on the back to be used for wall mounting. This helps save valuable floor space. This heater has been specifically safety tested to be mounted on the wall.

    Can I take off the wheels/castors on this heater?
    Yes, you can remove the castor plates from this metal panel heater if you decide you want to wall mount it.
    You may find that when the castor plates were installed, there were 1-way screws used which means you will not be able to use a screwdriver to remove them.
    You may need to use a pair of pliers to unscrew them or failing that use a drill to remove the head of the screw and then you should be able to remove the castor plates. Remember to remove the remaining part of the screw as it will be sharp.